- Argus Over Usb Driver Download Free
- Argus Over Usb Driver Download Windows 7
- Argus Over Usb Driver Download Mac
- Argus Over Usb Driver Download
- Argus Over Usb Driver Download Windows 10
Note: the operation of WinTV under Windows requires two pieces: a WinTV driver and a WinTV application (the WinTV application is available below in 'Latest WinTV Application' section). You cannot run the application without loading the driver.
Latest driver for the WinTV-USB, WinTV-USB-FM and USB-Live for laptop and desktop PC's using USB 1.1 or USB 2.0 This driver will remove and replace any older WinTV-USB driver.
To install:
- Download this file (wintvusb_264_23189.exe) and save it to a directory you will remember (for example: C:)
- Run wintvusb_264_23189.exe. This will unpack the driver and start the driver installation. You do not have to remove the WinTV-USB.
- Halfway through the installation you will be asked to Reboot. Do so to continue the driver installation.
- After rebooting, Windows will display a 'New Hardware Found' message, and then go on to install this updated driver.
- Now, download and install the WinTV application (see below).
New features:
The USB and PS/2 ports on your USB Mobile Port Replicator with Ethernet are supported by the Windows 98, ME, and 2000 operating systems and do not require any additional drivers. However, drivers are required to recognize the Parallel, Serial and Ethernet ports and convert them to USB. A driver is necessary in order for an Argus digital still camera to be accessed in a machine. An Argus digital camera driver offers the essential interface between the camera and the computer. One must update his machine with the most current Argus digital still camera drivers if he wishes to enjoy fast data transfer and prevent frequent. Driver and Software Downloads. Find and download drivers, software, and user guides for Targus products including docking stations, USB hubs, video adapters, and tablet cases. For Technical News and Updates: Vist our Tech Talk Blog. For Assistance: Visit our Support Page. Note: For the best experience access this page from a desktop or laptop.
This driver fixes problems with SoftPVR on some PCs and laptops.
Targus USB 2.0 Laptop Docking Station with Video 5 To use the Targus Docking Station, you must first install the driver onto your computer. Then, connect the docking station to your computer and Windows plug-and-play will install the hardware drivers for each port. Installing the Device and Drivers System Requirements Hardware.
This driver supports better video quality on some VGA cards by using 'VMR'. To turn this on, click Windows Start / Programs / Hauppauge WinTV / Primary and then select 'Allow VMR'.
If your VGA card does not support VMR, then chose 'Allow Overlay'.
This driver supports either analog audio into your PC, or audio over the USB bus.
Audio over USB is simpler to connect, but analog audio through the supplied 'Audio cable' into a sound card gives higher quality audio sound. Most desktop PC's and some laptop computers have a jack on their soundcard marked 'Line In'. If your PC or laptop has a 'LineIn' jack, we recommend connecting the WinTV-USB's 'analog audio output' to your sound card.
This driver supports either analog audio into your PC, or audio over the USB bus. Audio over USB is simpler to connect, but analog audio into a sound card gives higher quality audio sound. Most desktop PC's and some laptop computers have a jack on their soundcard marked 'Line In'. If your PC or laptop has a 'LineIn' jack, we recommend connecting the WinTV-USB's 'analog audio output' to your sound card.
To switch between digital and analog audio, on the WinTV2000 application click 'Menu', then 'Audio Type' and then select:
- Analog Rec+Live: audio goes over the supplied Audio cable to your PC or laptop's 'Line In' jack
- Digital Rec/Analog Live: While watching live TV, audio goes over the supplied Audio cable. While recording, audio goes over the USB cable.
- Digital Rec+Live: audio goes over the USB cable while watching Live TV and while recording. This mode should be used if your PC or laptop DOES NOT have a Line In jack.
Name: wintvusb_264_23189.exe
Version: 2.64_23189.exe
Updated: July 1, 2005
WinTV2000 application
To install, copy this file to a temporary directory on your local disk. Then run wintv2k_412_24054.exe, which will install the new WinTV2000 application.
For support of the new Hauppauge remote control and the Hauppauge IR RemoteBlaster, use the latest IR Remote Control and IRBlaster Setup program. (found in the Accessories section of this page).
Name: wintv2k412_24054.exe
Size: 2.5 Mb
Updated: Jan. 11, 2006
WinTV Radio application for use with WinTV version 6
Notes:
- this application runs with WinTV version 6 on WinTV boards equipped with FM radio
- WinTV v7 has a built-in FM radio application
To install, download to a temporary directory and run RADIO32.EXE
New features include 30 presets and local/distance reception. Also, name radio stations by creating a preset and then clicking on the freq display and typing in the string you want.
Click here to see instructions on using the new WinTV Radio32 application.
Name: radio32_154_26154.exe
Version: 1.54
Size: 340 KB
Updated: June 3, 2008
WinTV-Scheduler update
None at this time
None at thie time.
What operating system can my 'WinTV-USB' be installed under?
NOTE: The latest drivers for the WinTV USB are available in the Apps/Drivers section.
Minimum System Requirements to Install WinTV-USB
- 733Mhz Pentium or faster
- Windows 98, WindowME, Windows2000 or WindowsXP
- Sound card with LINE IN
Configuring audio
WinTV-USB (model 400xx)
This default setting requires the supplied double ended stereo cable to be connected from the Line-Out on the WinTV-USB to the Line-In on your sound card.
WinTV-USBpro (model 402xx)
The usb pro can use either analog or digital audio. To use analog audio use the supplied double ended stereo cable to be connected from the Line-Out on the WinTV-USB to the Line-In on your sound card.
WinTV-USB Pro, Enabling Audio over USB
NOTE: To use digital audio do not connect the audio cable between the wintv and your sound card
After you complete the WinTV-USB driver installation, the default Audio setting is Digital Rec/Analog live. This means that digital audio when recording and analog audio when watching live TV. Digital audio is audio sent over the USB cable, while analog audio is audio sent via the audio cable from the WinTV-USB to the sound card in your laptop.
You can see the Audio setting by clicking the Menu button in WinTV:
You can see the Audio setting by clicking the Menu button in WinTV:
To enable the audio over USB when watching live TV, click on the Menu button and go to Audio Type and select Digital Rec+Live.
Last, you will be asked to Restart the WinTV application to have the changes take effect.
Causes for System Lockups
Black Screen in WinTV
There is no Audio from the WinTV-USB (analog audio)
First, be sure that the supplied audio cable is connected from the WinTV USB to the Sound Cards LINE-IN. NOTE: On some systems that do not have an actual 'line in', substitute 'Auxiliary'(AUX), or 'Microphone'(Mic) for the configuration procedures below.
In the WinTV USB Application, under CONFIGURE- AUDIO, be sure that the MIXER-ID list shows 'Line-in', that MUTE is not checked, and that the volume is up.
Also, in the sound card volume configuration (under PROGRAMS- ACCESSORIES-ENTERTAINMENT-VOLUME CONTROL), be sure that the LINE-IN section is not on MUTE (as it commonly is on default) and that the volume is up.If there is no “Line-in” section on your mixer, go to OPTIONS / PROPERTIES and check “Playback” and then check “Line-in” in the 'Show the following Volume Controls:' box below. This will add the “Line-in” section to your mixer. When adding a section to your mixer, it will usually added with the MUTE box checked, so be sure to uncheck this box.
NOTE: The WinTV USB provides MONO audio only.
Error Messages when attempting to run WinTV32 or WinTV2000
Can I view Closed Captioning data with the WinTV-USB?
Argus Over Usb Driver Download Free
Argus Over Usb Driver Download Windows 7
The audio is not recorded when I capture video (analog audio)
It is actually the Sound Card that will capture the Audio portion when using WinTV.
If you do not record the Audio when you are capturing Video Clips, you want to make sure that the sound card's Line In mixer is setup to Record audio. Sometimes they are set for Playback only. To Check this, click on Start - Accessories - Entertainment (or Multimedia), in the Windows Volume Control, go to Options then Properties. In here click on the Recording Bullet. Below you should see the Mixers that are set to record make sure that the Line In is checked and click on OK. Then make sure that it is not muted. Try to record some audio through the Line In jack using Windows' Sound Recorder. This program is found in the Multimedia group.
Argus Over Usb Driver Download Mac
If you can record audio using the Sound Recorder, then you should be able to capture audio with the capture program.
Prodinfo: get information on your Hauppauge TV tuner
Prodinfo.exe is a program you can run which will extract information about the WinTV product you have installed such as model and serial number, MAC address, revision, and features which can be used to identify the exact model of your product. The driver for the device must be installed in order to run Prodinfo.exe
Argus Over Usb Driver Download
HCWClear: remove the Hauppauge driver and applications from your PC
Argus Over Usb Driver Download Windows 10
HCWCLEAR.exe is a program you run to remove all driver and files that were installed with the installation of the WinTV program.
Category: Camera
Manufacturer: Argus
Caution Level: Intermediate
Download File Size: 3.6Mb
Operating System: Windows XP
Latest Version / Release Date: 913.311.0303.04 / 03 Mar 2004
Windows device driver information for Argus Digital Still Camera
Argus Digital Still Camera takes still photographs and videos digitally by capturing images through an electronic image sensor. The camera is capable of doing things that film cameras cannot do. It can display photos on a screen after they have been captured and store thousands of photos in one small memory device. It can also record videos with sound and eliminating images after they have been taken. A driver is necessary in order for an Argus digital still camera to be accessed in a machine. An Argus digital camera driver offers the essential interface between the camera and the computer. One must update his machine with the most current Argus digital still camera drivers if he wishes to enjoy fast data transfer and prevent frequent disconnections between the computer and the camera.
Outdated Drivers?
Unless you update your drivers regularly you may face hardware performance issues.
To check your drivers you should manually verify every device on your system for driver updates
Argus digital still camera driver enables higher-level computer applications to interact with the digital still camera. The driver usually communicates with the camera through a computer bus or through a communications subsystem where the camera is attached. When a calling application summons a routine in the Argus digital still camera driver, the driver gives out commands to the device. Once data has been sent back to the camera, the driver may then call routines in the first calling application. The driver typically presents the interrupt handling needed for any required asynchronous time-dependent hardware crossing point. Not only does it simplify programming by means of acting as an abstraction level between the camera and the Operating System, it also protects the Operating System from programs that are operating in user-mode. It is highly recommended you run a free registry scan for Windows and Argus Digital Still Camera errors before installing any driver updates.